Sunday, 31 March 2013

HTC Wildfire Reset to Stock ROM


If you’re on cyanogenmod or some other rooted ROM and you’re missing the smoothness of HTC Sense J , worry not.

 If you didn’t take a Nandroid Backup of the stock ROM when rooting your phone, you’ll have to download and install the correct version of the stock HTC ROM for your model and region.

Some links to these ROMs are at


Generally, RUU's are named as


RUU_Buzz____Radio__release_.exe
 

 Note the EXE versions will UNROOT your phone and leave you with an original HTC ROM in case you need to claim a warranty fix on your phone.

 I prefer the ZIP versions which keep the phone with ROOT and you can then use Root Uninstaller from the Play Store to disable any system apps which you don’t want to use.

 For Wildfire S Asia India RUU this is the ZIP version of the ROM


 And for plain Wildfire i.e. A3333 use the download from here

In case the link is broken Search for “Buzz_Froyo_hTC_Asia_India_2.25.720.1-dannejo.zip”

Make sure you download the valid ROM for your REGION, and for your Device Model. The above link is only for ASIA_INDIA

Before you do anything else,

Take a Nandroid Backup of your working ROM.

If you use the wrong ROM, you will be stuck waiting on the HTC Logo screen for like ever.

If your phone is bricked in that manner, remove and then reinsert the battery and try to get into Recovery mode into one of the earlier Nandroid backups.

 Installation Method:

Take a Nandroid Backup of your Cyanogenmod ROM in case you want to revert to it later
  • Copy the ZIP to root of your SD card
  • Wipe Dalvik Cache
  • Factory Reset
  • Then flash the zip from SD card

First reboot takes a while – all else good after that

 

 

 

6 comments:

  1. Thanks Man..Thanks a Lot..Ur thread seems a lot to me..! Hugs n Kisses..! God bles.!

    ReplyDelete
  2. May I know how long it will take to boot because it installed successfully for me but its not booting up

    ReplyDelete
  3. Vishnu - if it is the right ROM then not more than 5 minutes for the first boot. If youre stuck on HTC logo for very long - then chances are the ROM is not compatible for your device - Wildfire or Wildfire S.

    ReplyDelete
  4. i'm stucking with the same this is taking more time for me, it would be better if you have any other compatible rom for me

    ReplyDelete
  5. Great - Thanks so much. Works as expected.

    ReplyDelete
  6. how to download a ROM of region PAKISTAN of htc wildfier.../??????

    ReplyDelete

How to connect Raspberry Pi Pico to a external temperature sensor(DHT11 or DHT22)

How to connect Raspberry Pi to DHT 11 / DHT 22   Connect your DHT11 sensor to the Pico accordingly -   Left pin (Signal) - GPIO Pin 22 (or a...